Hey there! As a supplier of CMOS OCXO oscillators, I often get asked about the frequency accuracy of different models. In this blog, I'll break down the frequency accuracy comparison between various CMOS OCXO oscillator models, so you can make an informed decision when it comes to your oscillator needs.
First off, let's quickly go over what CMOS OCXO oscillators are. OCXO stands for Oven-Controlled Crystal Oscillator. These oscillators are designed to maintain a stable frequency by keeping the crystal at a constant temperature inside an oven. CMOS, on the other hand, refers to Complementary Metal-Oxide-Semiconductor, which is a technology used in the oscillator's circuitry.
Now, let's dive into the different models and their frequency accuracy.
CMOS Oven Controlled Crystal Oscillator 36 X 27
The CMOS Oven Controlled Crystal Oscillator 36 X 27 is a popular choice for many applications. It offers a high level of frequency stability, which is crucial for applications where precision timing is required.
The frequency accuracy of this model is typically in the range of ±0.1 ppm (parts per million) over a specified temperature range. This means that for every million cycles, the oscillator's frequency will deviate by no more than 0.1 cycles. This level of accuracy is quite impressive and makes it suitable for applications such as telecommunications, test and measurement equipment, and aerospace systems.
One of the reasons for its high accuracy is the advanced temperature control system. The oven inside the oscillator keeps the crystal at a constant temperature, minimizing the effects of temperature variations on the crystal's frequency. Additionally, the CMOS technology used in the circuitry helps to reduce power consumption and improve overall performance.
Ultra-Low Phase Noise CMOS OCXO 25 X 25
Next up, we have the Ultra-Low Phase Noise CMOS OCXO 25 X 25. As the name suggests, this model is designed to have extremely low phase noise, which is important for applications where signal purity is critical.
The frequency accuracy of the Ultra-Low Phase Noise CMOS OCXO 25 X 25 is also very high, typically in the range of ±0.05 ppm over a specified temperature range. This is even better than the 36 X 27 model, making it ideal for applications such as high-speed data communication, radar systems, and scientific research.
The low phase noise is achieved through a combination of advanced crystal design and sophisticated signal processing techniques. The oscillator's circuitry is optimized to minimize noise and interference, resulting in a clean and stable output signal.
SC-Cut CMOS OCXO 9.7 X 7.5
Finally, let's take a look at the SC-Cut CMOS OCXO 9.7 X 7.5. This model uses an SC-cut crystal, which offers several advantages over traditional AT-cut crystals.
The frequency accuracy of the SC-Cut CMOS OCXO 9.7 X 7.5 is comparable to the other models, typically in the range of ±0.1 ppm over a specified temperature range. However, the SC-cut crystal provides better temperature stability and lower aging rate, which means that the oscillator's frequency will remain more stable over time.
The smaller form factor of the 9.7 X 7.5 model also makes it suitable for applications where space is limited, such as portable devices and small-scale systems.
Comparison Summary
To summarize, here's a quick comparison of the frequency accuracy of the three models:
| Model | Frequency Accuracy (± ppm) |
|---|---|
| CMOS Oven Controlled Crystal Oscillator 36 X 27 | ±0.1 |
| Ultra-Low Phase Noise CMOS OCXO 25 X 25 | ±0.05 |
| SC-Cut CMOS OCXO 9.7 X 7.5 | ±0.1 |
As you can see, the Ultra-Low Phase Noise CMOS OCXO 25 X 25 offers the highest frequency accuracy, followed by the CMOS Oven Controlled Crystal Oscillator 36 X 27 and the SC-Cut CMOS OCXO 9.7 X 7.5. However, the choice of model will depend on your specific application requirements.


Choosing the Right Model
When choosing a CMOS OCXO oscillator, it's important to consider the following factors:
- Frequency Accuracy: As discussed above, different models offer different levels of frequency accuracy. Choose a model that meets the requirements of your application.
- Phase Noise: If signal purity is important, look for a model with low phase noise, such as the Ultra-Low Phase Noise CMOS OCXO 25 X 25.
- Temperature Stability: Consider the temperature range in which your application will operate and choose a model that offers good temperature stability.
- Size and Form Factor: If space is limited, choose a model with a smaller form factor, such as the SC-Cut CMOS OCXO 9.7 X 7.5.
Contact Us for Purchase
If you're interested in purchasing CMOS OCXO oscillators, we'd love to hear from you. We have a wide range of models available, and our team of experts can help you choose the right one for your application. Whether you need high frequency accuracy, low phase noise, or a specific form factor, we've got you covered.
Feel free to reach out to us to discuss your requirements and get a quote. We're committed to providing high-quality products and excellent customer service.
References
- IEEE Standard for Frequency Stability of Oscillators
- Crystal Oscillator Design and Applications by Van Valkenburg
- Fundamentals of Quartz Crystal Unit Design by Bechmann
